FAST SOLUTION TO FIND QUASI-STATIC PARAMETERS IN ELASTIC CONTACT USING LINEAR DISPLACEMENT AND VARIABLE SFIFFNESS
Keywords:
Hertz contact, contact area, contact pressure, exponent p=1, variable rigidity, minimum iterationsAbstract
Hertz theory expresses the dependence between load and contact approach, using a nonlinear function. Usually, an exponent p=1.5 for point contact or p=1.11 for line contact is chosen. If we look at measure units, then a correlation results between load and an exponential function of displacement. Q = C * δ p , where Q is the load, C the contact stiffness, δ is the displacement and p an exponent. That observation shows that the contact stiffness has to have Newton/meter^p as measure unit.
This paper presents a linear dependence between load and displacement, applied either to point contact type or line contact, equivalent with p exponent equal to 1. Results calculated with the new relationship are successfully compared to results calculated with other published relationships and to some available experimental results, presented in literature.
Downloads
Published
Issue
Section
License
All rights are reserved for this publication, which is copyright according to the Romanian law of copyright. Excepting only any fair dealing for the purpose of the private study, research, review, comment and criticism, no part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, mechanical, electrical, electronic, optical, photocopying, recording or otherwise, without the prior express permission of the copyright owners.
