Vol. 40 (2022)

Articles

• Study on the Application of the Holistic Optimization Method of the Manufacturing Process in the Case of a Reduced Extension Instances Database

  Afteni Cezarina, Afteni Mitica, Frumusanu Gabriel-Radu

  • 1_Rez AnaleTMB_2022_Afteni (anglais)

• The Influence of Lubrication on the Roughness of the Vibroburnished Surface

  Nagîț Gheorghe, Slătineanu Laurențiu, Dodun Oana, Păunoiu Viorel, Mihalache Marius-Andrei, Rîpanu Marius-Ionuț, Hrițuc Adelina, Surugiu Ioan

  • 2_Rez AnaleTMB_2022_Nagit (anglais)

• Study of the enwrapping of the front profiles of the active elements of a three-screw compressor

  Baroiu Nicușor, Teodor Virgil Gabriel, Păunoiu Viorel, Moroșanu Georgiana Alexandra, Crăciun Răzvan Sebastian

  • 3_Rez AnaleTMB_2022_Baroiu (anglais)

• Mechanical Behaviour of Macroscopic Interfaces for 3D Printed Multi-material Samples

  Ermolai Vasile, Sover Alexandru, Boca Marius Andrei, Hrițuc Adelina, Slătineanu Laurențiu, Nagîț Gheorghe, Stavarache Răzvan Cosmin

  • 4_Rez AnaleTMB_2022_Ermolai 1 (anglais)

• Influence of bond interface over the lap-shear performance of 3D printed multi-material samples

  Ermolai Vasile, Sover Alexandru, Nagîț Gheorghe

  • 5_Rez AnaleTMB_2022_Ermolai 2 (anglais)

• Analysis of the metal sheets formability at single point incremental forming process

  Rusu Gabriela-Petruța, Oleksik Valentin, Breaz Radu Eugen, Dobrotă Dan, Popp Ilie

  • 6_Rez AnaleTMB_2022_Rusu (anglais)

• Analysis of forming forces at SPIF using Taguchi method

  Popp Mihai-Octavian, Racz Sever-Gabriel, Oleksik Mihaela, Gîrjob Claudia, Biriș Cristina

  • 7_Rez AnaleTMB_2022_Popp (anglais)

• Optimization of Manufacturing Processes by Reducing the Costs of Tools and Equipment on Hydraulically Operated High-Pressure Technological Lines

  Popescu Teodor Costinel, Chiriță Alexandru-Polifron, Popescu Ana-Maria Carla, Vlad Andrei, Trăneci Gheorghe Alexandru, Popescu Alina Iolanda

  • 8_Rez AnaleTMB_2022_Popescu (anglais)

• Modern Techniques for Remanufacturing Hydraulic Equipment in the Context of Circular Economy and Energy Efficiency

  Dumitrescu Cătălin, Gavrus Adinel, Rădoi Radu, Șefu Ștefan, Chiriță Alexandru-Polifron, Popescu Ana-Maria, Preda Dragoș

  • 9_Rez AnaleTMB_2022_Dumitrescu (anglais)

• Neural networks for predicting kerf characteristics of CO2 lasermachined FFF PLA/WF plates

  Fountas Nikolaos, Ninikas Konstantinos, Chaidas Dimitrios, Kechagias John, Vaxevanidis Nikolaos

  • 10_Rez AnaleTMB_2022_Fountas (anglais)

• Quality characteristics analysis for the assembly of the elements from the construction of a mechanism for adjusting the seats in the automotive industry

  Moroșanu Georgiana Alexandra, Teodor Virgil Gabriel, Păunoiu Viorel, Crăciun Răzvan Sebastian, Baroiu Nicușor

  • 11_Rez AnaleTMB_2022_Morosanu (anglais)

• On the Machining of Joint Implant UHMWPE Inserts

  Piska Miroslav, Urbancova Katerina

  • 12_Rez AnaleTMB_2022_Piska (anglais)

• Digital Twins for Micro Machining

  Ostasevicius Vytautas, Mikuckyte Sandra, Gaidys Rimvydas, Jurenas Vytautas, Daniulaitis Vytautas

  • 13_Rez AnaleTMB_2022_Ostasevicius (anglais)

• Management of tools in digital manufacturing - A case study

  Vukadinovic Vojin, Zivkovic Jovan, Majstorovic Vidosav, Djurdjanovic Dragan

  • 14_Rez AnaleTMB_2022_Vukadinovic (anglais)

• How to apply the ERP model for Smart Mining?

  Majstorovic Vidosav, Simeunovic Vladimir, Mitrovic Radivoje, Stosic Dragan, Dimitrijevic Sonja, Miskovic Zarko

  • 15_Rez AnaleTMB_2022_Majstorovic (anglais)

• Functional correlation surface texture / grip of a deposit: case of NiP

  Levrel Enora, Binti Mohd Safie Siti Nursyafinaz, Malécot Pierrick, Lambert Virgile, Fontaine Michael, Hallez Loic, Lallemand Séverine

  • 16_Rez AnaleTMB_2022_Levrel (anglais)

• Biodegradable polymer properties through ceramic coatings

  Marguta Alina, Mazurchevici Simona-Nicoleta, Carausu Constantin, Nedelcu Dumitru

  • 17_Rez AnaleTMB_2022_Marguta (anglais)

• Getting started procedure of a NC machine simplified by the use of a mixed-reality training scenario

  Seitier Philippe, Gilles Patrick, Boudier Valérie, Galaup Michel, Lagarrigue Pierre

  • 18_Rez AnaleTMB_2022_Seitier (anglais)

• In-situ prediction of the spatial surface roughness profile during slot milling

  Peukert Bernd, Rangaraju Adithya, Archenti Andreas

  • 19_Rez AnaleTMB_2022_Peukert (anglais)

• An Inverse Analysis Method Applied to Optimization of Specimen’s Shape for Performing Hot Rapid Crushing Tests from Homogeneous Initial Temperature Field

  Gavrus Adinel

  • 20_Rez AnaleTMB_2022_Gavrus 1 (anglais)

• An Energy Approach Applied to Define Elasto-Plastic Constitutive Models Describing Thermomechanical Metallic Materials Behavior During Forming Processes

  Gavrus Adinel

  • 21_Rez AnaleTMB_2022_Gavrus 2 (anglais)

• Contribution to a new method for deep drawing with kinetic control

  Paunoiu Viorel, Teodor Virgil Gabriel, Baroiu Nicusor, Moroșanu Georgiana Alexandra, Epureanu Alexandru

  • 22_Rez AnaleTMB_2022_Paunoiu (anglais)

• Vibration transmissibility of aluminum foam for design as a bearing damper

  Fettah Bilal, Zahloul Hamou

  • 23_Rez AnaleTMB_2022_Bilal (anglais)

• A CAD-CAE-CAM approach to manufacture the car door handle through SPIF

  Rusu Gabriela-Petruța, Popp Mihai, Tera Melania, Crenganiș Mihai, Maroșan Adrian, Bârsan Alexandu

  • 24_Rez AnaleTMB_2022_Rusu 2 (anglais)

• Infill parameters influence over strength of 3D printed samples by Fused Filament Fabrication

  Irimia Alexandru-Ionuț, Ermolai Vasile, Nagîț Gheorghe, Sover Alexandru

  • 25_Rez AnaleTMB_2022_Irimia (anglais)

• Machinability optimization of dry CNC turning of UNIMAX® tool steel in annealed and hardened states by implementing swarm intelligence algorithms

  Fountas N.A., Papantoniou I., Manolakos D.E., Kechagias J., Vaxevanidis N.M.

  • 26_Rez AnaleTMB_2022_Fountas 2 (anglais)

• Advanced Production of Aluminum and Steel Cans

  Sedlacek Jan, Foksova Veronika, Piska Miroslav

  • 27_Rez AnaleTMB_2022_Sedlacek (anglais)

• Feasibility and parametrical study of an incremental sheet bending process using a finite element model

  Ballouch Said, Ait Ali Mohamed Elamine, Guines Dominique

  • 28_Rez AnaleTMB_2022_Ballouch (anglais)