INFLUENCE OF PTFE CONCENTRATION IN PBT ON MECHANICAL PROPERTIES
Mots-clés :
PBT PTFE blend, tensile test, mechanical propertiesRésumé
Based on traction tests, the authors assessed the influence of the PTFE concentration on the mechanical characteristics of blends PBT + PBT. The studied range of PTFE addition was 0...20% wt.
For these samples, the traction limit of PBT is 40.58 MPa, but for the blend PBT+10% PTFE, this characteristic increase to 46 MPa. For 15% PTFE in PBT, the traction limit was 45.59 MPa and for the blend with 20% PTFE, the average value was 42.37 MPa. The tendency of changing the traction limit is similar to that for the elastic modulus.
Adding PTFE in PBT is not beneficial for improving the mechanical characteristics, at least for the tested range of concentrations, but they have to known for designing tribological applications.
Téléchargements
Publiée
Numéro
Rubrique
Licence
All rights are reserved for this publication, which is copyright according to the Romanian law of copyright. Excepting only any fair dealing for the purpose of the private study, research, review, comment and criticism, no part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, mechanical, electrical, electronic, optical, photocopying, recording or otherwise, without the prior express permission of the copyright owners.
