ROLLING FRICTION TORQUE IN LUBRICATED CONTACTS FROM MICRO TO MACRO SCALE
Mots-clés :
Rolling friction torque, dry and lubricated contacts, axial ball bearing, friction test methods, dynamic modellingRésumé
Using a modified axial ball bearing with three balls and a new analytical methodology, this paper investigates, both theoretically and experimentally, the variation of the rolling friction torque in a ball-race contact in dry and lubricated conditions. It was determined that for the microballs having 1.588 mm in diameter, the rolling friction torque determined with the help of the proposed methodology in lubricated conditions is higher with one order of magnitude than the rolling friction torque determined with the help of Biboulet–Houpert equation. Increasing the diameter of the balls to 7.938 mm, the rolling friction torque determined by the proposed methodology corresponds to the values obtained by Biboulet–Houpert equation. Also, when the maximum Hertzian contact pressure between a ball and a race in pure rolling motion has low values (0.1–0.4 GPa), it was shown that in a ball-race contact operating from dry conditions to fully flooded lubricated conditions, both in micro scale and macro scale, the rolling friction torque has a continuum increases, dry conditions realizing the minimum friction torque.
Téléchargements
Publiée
Numéro
Rubrique
Licence
All rights are reserved for this publication, which is copyright according to the Romanian law of copyright. Excepting only any fair dealing for the purpose of the private study, research, review, comment and criticism, no part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, mechanical, electrical, electronic, optical, photocopying, recording or otherwise, without the prior express permission of the copyright owners.
