Construction of the FH 150 Hydro-Geological Drilling Facility with Additive Manufactured Markers Through 3D Printing

Authors

  • Sorin Alexandru FICĂ IPCUP Ploiesti, Romania
  • Andrei DIMITRESCU Politehnica University from Bucharest, Romania
  • Claudiu BABIȘ Politehnica University from Bucharest, Romania

DOI:

https://doi.org/10.35219/mms.2023.2.04

Keywords:

3D printing, Fused Deposition Modeling, water drilling installation, FH 150

Abstract

The washing head is the most important sub-assembly in a water well drilling installation, and ensures the operation of the installation on the principle of "hydraulic rotary drilling with direct circulation of drilling fluid", whereby, inside the rotating drill rod assembly is injected, through the washhead, drilling fluid from the discharge of the drilling mud pump, which is fed from a pit (pit) dug below ground level.

Creative Commons License

Downloads

Download data is not yet available.

Downloads

Published

2023-06-15

Issue

Vol. 46 No. 2 (2023)

Section

Articles

How to Cite

1.
Construction of the FH 150 Hydro-Geological Drilling Facility with Additive Manufactured Markers Through 3D Printing. Ann_UGAL_MMS [Internet]. 2023 Jun. 15 [cited 2026 Nov. 2];46(2):23-7. Available from: https://ojs.ugal.ro/index.php/mms/article/view/6121

Most read articles by the same author(s)