Cladding by Welding with Hard Alloys

Ovidiu Dima

Cladding by Welding with Hard Alloys

Authors

Ovidiu Dima "Dunarea de Jos" University of Galati, Romania

Keywords:

cladding, refractory, abrasive wear, thermal stability

Abstract

The paper presents the results of a research on the role of cladding by welding support of continuous casting plant. Emphasizing that plating leads to outer layer the study presents a complex of properties favorable for the working conditions of abrasion and oxidation resistance at high temperatures.

Downloads

Download data is not yet available.

Downloads

PDF

Published

2009-05-15

Issue

Vol. 32 No. 1 (2009)

Section

Articles

How to Cite

1.

Cladding by Welding with Hard Alloys. Ann_UGAL_MMS [Internet]. 2009 May 15 [cited 2026 Nov. 2];32(1):104-7. Available from: https://ojs.ugal.ro/index.php/mms/article/view/3077

Download Citation

Most read articles by the same author(s)

Ovidiu DIMA, Petrică ALEXANDRU, Gheorghe GURĂU, Vlad Gabriel VASILESCU, Elisabeta VASILESCU, Studies and Research on Treatment of Titanium Alloys , The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science: Vol. 37 No. 1 (2014)
Ovidiu DIMA, Nicolae CANANAU, Dinel TANASE, Experimental Researches on the Lobe Deformation Process , The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science: Vol. 34 No. 3 (2011)
Livia GHEORGHIEŞ, Ovidiu DIMA, Method of Determining the Main Features of Magnetic Ferromagnetic Materials , The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science: Vol. 35 No. 4 (2012)
Ovidiu DIMA, Olga MITOSERIU, Behavior of Some Stainless Nitrided Austenite Steel Types to Corrosion and Abrasion , The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science: Vol. 29 No. 2 (2006)
Nicolae CANANAU, Ovidiu DIMA, Dinel TANASE, Some Researches on the Cutting Process Using a Stamping Device , The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science: Vol. 34 No. 1 (2011)
Ovidiu DIMA, Behaviour at Nitriding in Fluidized Layer of Austenitic Stainless Steels at the Temperature of 1050 °C , The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science: Vol. 30 No. 2 (2007)
Ovidiu DIMA, Behavior of Welded Joints From Some Stainless Austenite Steel Types During Nitriding Process , The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science: Vol. 29 No. 2 (2006)
Ovidiu DIMA, Nelu CAZACU, Surface Hardening by Nitration for Some Stainless Austenite Steel Types , The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science: Vol. 29 No. 1 (2006)
Ovidiu DIMA, Sanda LEVCOVICI, Constantin GHEORGHIES, Aspects of Nitrated Layer Structure for Some Types of Austenite Stainless Steel , The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science: Vol. 29 No. 1 (2006)
Ovidiu DIMA, Behaviour at Nitriding in Fluidized Layer of Austenitic Stainless Steels at the Temperature of 450 °C , The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science: Vol. 30 No. 1 (2007)

1 2 > >>

Cladding by Welding with Hard Alloys

Authors

Keywords:

Abstract

Downloads

Downloads

Published

Issue

Section

How to Cite

Most read articles by the same author(s)

Make a Submission