AM-FFF of Objects Using Commercial PLA Based Shape Memory Polymer Printed by an Open-Source 3D Printer

Authors

  • N. Dresler School of Mechanical Engineering, Afeka Academic College of Engineering, Tel Aviv 6910717, Israel
  • A. Ulanov School of Mechanical Engineering, Afeka Academic College of Engineering, Tel Aviv 6910717, Israel
  • M. Aviv School of Mechanical Engineering, Afeka Academic College of Engineering, Tel Aviv 6910717, Israel
  • D. Ashkenazi School of Mechanical Engineering, Tel Aviv University, Ramat Aviv, Israel https://orcid.org/0000-0001-5871-1903 (unauthenticated)
  • A. Stern School of Mechanical Engineering, Afeka Academic College of Engineering, Tel Aviv, Israel & Department of Materials Engineering, Ben-Gurion University of the Negev, Beer Sheva, Israel https://orcid.org/0000-0002-8980-9214 (unauthenticated)

DOI:

https://doi.org/10.35219/awet.2020.04

Keywords:

Additive manufacturing, 4D printing, Fused Filament Fabrication, Shape Memory Polymer

Abstract

The 4D additive manufacturing processes are considered today as the "next big thing" in R&D. The aim of this research is to provide two examples of commercial PLA based shape memory polymer (SMP) objects printed on an open-source 3D printer in order to proof the feasibility of such novel 4D printing process. To that purpose, a PLA based filament of eSUN (4D filament e4D-1​white, SMP) was chosen, and two applications, a spring and a vase, were designed by 3D-printing with additive manufacturing (AM) fused filament fabrication (FFF) technique. The 4D-printed objects were successfully produced, the shape memory effect and their functionality were demonstrated by achieving the shape-memory cycle of programming, storage and recovery.

Downloads

Download data is not yet available.

Downloads

Published

2020-12-21

Issue

Vol. 31 (2020)

Section

Articles

License

Papers accepted for publication become the copyrighted property of the Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology. No part of the publication may be reproduced or transmitted in any form, or by any means, electronic or mechanical, including photocopy, recording, or any information storage and retrieval system, except in limited quantities for the non-commercial purposes of scientific or educational advancement, without permission in writing from the Editorial Board.

How to Cite

AM-FFF of Objects Using Commercial PLA Based Shape Memory Polymer Printed by an Open-Source 3D Printer. (2020). Annals of “Dunarea de Jos” University of Galati. Fascicle XII, Welding Equipment and Technology, 31, 30-34. https://doi.org/10.35219/awet.2020.04

Most read articles by the same author(s)

<< < 1 2 3